Digi Connect Sensor+ User Manual page 80

Option Description
Station 3: List of variable addresses on the specified station that you want to monitor. The items in the list must be
Variable List separated by a comma without spaces. The list is limited to 63 characters, which allows for 8 to 10 variables
in a list.
A station address configured for the sensor.
Station 4:
When the value is set to 0, this station is skipped.
Client
Address
Station 4: List of variable addresses on the specified station that you want to monitor. The items in the list must be
Variable List separated by a comma without spaces. The list is limited to 63 characters, which allows for 8 to 10 variables
in a list.
Range
Default
63 characters blank
0 - 247
0
63 characters blank