Digi Connect Sensor+ User Manual page 53

Configure Digi Connect Sensor+ device settings
1. Sign in to Remote
2. Click the arrow next to your user name and choose Open Classic Remote Manager.
3. Click Admin > Account Settings > Notifications.
4. Click Add.
5. In the Name field, enter a descriptive name for the alarm notification.
6. In the Description field, enter a description of the alarm notification.
7. In the Send Email to field, enter the email address you want to receive the notification. More
than one email address can be entered. The addresses must be separated by a comma.
8. Designate the notification frequency. Both options are enabled by default.
Send daily summary reports at: Send a daily summary at the time specified.
n
Send notifications for each alarm event: Send a notification for each alarm event
n
when it occurs.
9. Specify whether you want to receive notifications for a set of alarms or for alarms scoped to a
group. You can only select one option.
Send notification for the following alarms
n
Send notification for alarms scoped to the following groups
n
10. Click Save. The alarm is now enabled and active.
Digi Connect Sensor+ User Guide
Manager.
a. Select the Send notification for the following alarms option.
b. Begin typing the name of the alarm. Remote Manager automatically
searches and displays a list of matching alarms.
c. Click the desired alarm in the list. The alarm is added to the field.
d. Repeat the process to add additional alarms.
a. Select the Send notification for alarms scoped to the following groups
option.
b. Begin typing the name of the group. Remote Manager automatically
searches and displays a list of matching groups.
c. Click on a group in the list. The group is added to the field.
d. Repeat the process to add additional group.
Configure battery life percentage alarms
53