Digital Input Cli Commands - Digi Connect Sensor+ User Manual

Digital input CLI commands

Use the commands in the following table with the set command and din1 when configuring the digital input options with the CLI. For example, type set
din1 ena=on to enable the digital input interface.
Option CLI command Description
Input interface ena
Alarms aem
Enables or disables the digital input source.
Enables or disables alarm reports for the
digital input source. When enabled, sends
an alarm report in one of the following
conditions:
High alarm
n
Low alarm
n
Delta high alarm
n
Delta low alarm
n
Value options
on
n
off
n
hi
n
lo
n
dh
n
dl
n
Enable multiple alarms using a
n
comma separated command
without spaces
(such as
set ain1 aem=hi,lo,dh,dl)
Default
off
Empty (all alarms
disabled)