Configure Digi Connect Sensor+ Device Settings; Configure Cellular Options - Digi Connect Sensor+ User Manual

Configure Digi Connect Sensor+ device settings

You can configure Digi Connect Sensor+ settings in Remote Manager.

Configure cellular options

n
Configure Remote Manager settings
n
Configure battery life percentage alarms
n
Configure internal temperature settings
n
Configure local interface settings: CLI and Bluetooth
n
Configure device (report) settings
n
Note The Digi Connect Sensor+ battery can operate 2 to 3 years when you follow standard operating
conditions. Changes Digi Connect Sensor+ device settings can affect battery life. For more information
on standard operating conditions, see
Configure cellular options
You configured necessary cellular settings during the initial Digi Connect Sensor+ setup. Use these
options to review the cellular configuration. Make changes to these settings only when instructed by
your cellular service provider and when you have physical access to the device. For details about these
options, see Cellular option
CAUTION! If you make changes to cellular settings that result in a disconnected device,
you must use the CLI to reconnect it to the cellular network; see
cellular
To configure cellular options:
1. Sign in to Remote
2. Click the arrow next to your user name and choose Open Classic Remote Manager.
3. Click Device Management > Devices tab.
4. Double-click the Digi Connect Sensor+ device you want to configure.
5. Expand the Configuration menu.
5. Click Cellular Settings.
6. Enter an appropriate value for each cellular option.
7. Apply the configuration changes:
Digi Connect Sensor+ User Guide
Battery life.
definitions.
connection. Using the CLI requires physical access to the device.
Manager.
Step 4: Configure the
48