Digi Connect Sensor+ User Manual page 13

Get started
drivers are available at www.ftdichip.com/Drivers/VCP.htm.
3. Open a terminal program on a computer and connect to Digi Connect Sensor+ using the
following configuration:
Connection port: Connect to the COM port associated with the USB cable connected to
n
Digi Connect Sensor+
Baud rate or bits per second: 115200
n
Data: 8 bit
n
Parity: None
n
Stop: 1 bit
n
Flow control: None
n
4. Press the Wake button on the device.
5. At the command prompt, type set apn=<yourCarrierAPN> where yourCarrierAPN is the string
supplied by your cellular service provider.
6. Press Enter. The terminal program displays the APN configuration setting's current value and
the pending value.
Digi Connect Sensor+ User Guide
Step 4: Configure the cellular connection
13