Use The Mobile App To View Sensor Data Streams - Digi Connect Sensor+ User Manual

View device and sensor data streams
4. Click a data stream to display the details for the stream.
5. To view historical information for a data stream, click one of the following options in the
bottom half of the window:
Click Charts to view the data as a graph.
n
Click Raw Data to view the data in a table (see the following image).
n

Use the mobile app to view sensor data streams

Digi Connect Sensor+ connects to the Digi Connect Wizard mobile app using Bluetooth Smart (low
energy). The Digi Connect Wizard mobile app allows you to view real-time sensor data on a nearby
mobile device.
Note When using an Android device, make sure it is running Android 4.4.3 or later.
To install and run the app:
1. Download the Digi Connect Wizard app.
2. Enable Bluetooth on your device and make sure it is near the Digi Connect Sensor+ device.
3. Open the app.
4. Wake the Digi Connect Sensor+.
5. Tap Read Sensors > Find Devices to scan for devices.
6. Tap your Digi Connect Sensor+ to list sensors on the device.
7. Tap a sensor name to see real-time data. Data points load at 5-second intervals.
Digi Connect Sensor+ goes into sleep mode when you close the app. If you keep the app open, Digi
Connect Sensor+ remains awake and takes sensor readings. The device goes into sleep mode after 60
minutes. Keeping the app open for long periods of time can reduce battery life.
Digi Connect Sensor+ User Guide
Use the mobile app to view sensor data streams
63