Table of Contents
Advertisement
Configure Digi Connect Sensor+ device settings
a. Click Save > Schedule. The Save Device Properties dialog appears.
b. Select Immediate.
c. Select Schedule Offline.
d. Click Schedule. Digi Connect Sensor+ downloads and applies configuration changes
Configure Remote Manager settings
Remote Manager settings options for Digi Connect Sensor+ are configured by default and require
updates only when instructed by Digi Technical Support. For details about these options, see
Cloud option
definitions.
To configure Remote Manager options:
1. Sign in to
Remote
2. Click the arrow next to your user name and choose Open Classic Remote Manager.
3. Click Device Management > Devices tab.
4. Double-click the Digi Connect Sensor+ device you want to configure.
5. Expand the Configuration menu.
5. Click Device Cloud Settings.
6. Enter appropriate values for each option.
7. Apply the configuration changes:
a. Click Save > Schedule. The Save Device Properties dialog appears.
b. Select Immediate.
c. Select Schedule Offline.
d. Click Schedule. Digi Connect Sensor+ downloads and applies configuration changes
Configure battery life percentage alarms
Battery percentage is a measurement of the remaining life of a battery used in a Digi Connect
Sensor+ device. This measurement gives you a data point for monitoring the health of the battery and
determining whether the battery should be replaced.
The battery percentage is calculated using an algorithm that considers current temperature
conditions, cell tower congestion, Connect Sensor power requirements, and how often the device
wakes up to take sensor readings and send reports to Remote Manager. See
information about these considerations.
Note
If an external power source is used to power Digi Connect Sensor+ and a battery is connected to
the device, the battery percentage is reported in Remote Manager as 100%.
Battery life alarm and alarm notification
Remote Manager has two battery life alarm methods that you can configure to alert you when the
battery life percentage falls below a specified threshold. The Global Alarm setting is configured by
Digi Connect Sensor+ User Guide
the next time it connects to Remote Manager.
Manager.
the next time it connects to Remote Manager.
Configure Remote Manager settings
Device
Battery life
for more
49
Advertisement
Table of Contents
Need help?
Do you have a question about the Connect Sensor+ and is the answer not in the manual?
Questions and answers