Create A Battery Life Alarm For Digi Connect Sensor+ Devices - Digi Connect Sensor+ User Manual

Configure Digi Connect Sensor+ device settings
default, and works with the battery indicator light on the device. You can also create an additional
battery life alarm that sends an email notification.
Global Alarm setting
The battery life percentage threshold for a device is configured in the Global Alarm Settings page by
default. This feature alerts you when the battery percentage falls below the specified threshold.
The battery indicator light on the device blinks in certain colors and patterns when the device wakes
to signify the battery status. When the battery percentage falls below the threshold, a battery alarm
data point is added to the data stream.
Configure the global battery alarm for a device
n
Create a battery life alarm
You can create an alarm to monitor the battery life percentage for one specified Digi Connect Sensor+
device, or for all devices that have a battery. When the conditions of the alarm are met, the alarm is
fired and the alarm status changes to Fired in the alarm list.
If you have set up email notification, you will receive an email when the alarm fires.

Create a battery life alarm for Digi Connect Sensor+ devices

n
Create a battery life alarm for Digi Connect Sensor+ devices
Within Remote Manager, you can create an alarm to monitor the battery life percentage in one
specific Digi Connect Sensor+ device, or all devices that have a battery.
Note You cannot monitor a group of devices.
When the conditions of the alarm are met, the alarm is fired and the alarm status changes to Fired in
the alarm list on the Alarms page.
After you have created the alarm, you can
alarm fires.
In this example, an alarm is fired when the battery percentage drops below 30%, and automatically
resets when the battery percentage is greater than 40%.
1. Sign in to Remote
2. Click the arrow next to your user name and choose Open Classic Remote Manager.
3. Click Device Management > Alarms.
4. Click Add. The Add Alarm dialog appears.
5. From the Alarm Type drop-down, choose the DataPoint condition option.
6. From the Severity list box, select the urgency of this alarm.
7. In the Name field, enter a short, descriptive name for the alarm.
8. In the Description field, enter a description of what the alarm does.
Digi Connect Sensor+ User Guide
set up email notification
Manager.
Configure battery life percentage alarms
and receive an email when the
50