Getting Started; Your Lto-2 Tape Drive; How Do I Connect The Drive To My Server; Front View Of Tape Drive - Fujitsu LTO-2 User Manual

1 Getting started

In this chapter:
• "Your LTO-2 tape
• "How do I connect the drive to my

Your LTO-2 tape drive

1. Drive door
2. Clean LED
3. Tape LED
Figure 1 Front view of tape drive
.

How do I connect the drive to my server?

The tape drive is installed into a 5¼-inch drive bay in your server and is attached to the host server's
internal SAS controller or SAS host bus adapter.
Connect a spare power cord from the server's internal power supply to the power connector on the
tape drive.
drive" on page 9
server?" on page 9
4. Drive LED
5. Ready LED
6. Eject button
LTO-2 Half-Height SAS Tape Drives 9