Operation; Operating The Console Drawer - Fujitsu FD-1100MT User Manual

6. Operation

CAUTION
CAUTION
CAUTION
6

.1 Operating the Console Drawer

1 . Remove the rubber stabilizer when it is not already removed.
2. Push down the latch lever in left side of front end of the Console Draw
Console Drawer by the handle until the slide lock clicks into place.
Pull the Console Drawer slowly toward you until the slide rails lock.
If the slide rails are not locked, the Console Drawer can move
unexpectedly. If they do not lock, the weight of the Console Drawer or any
person leaning on the Console Drawer may cause it to move suddenly,
and it may cause injury or damage to the product
Be careful not to pinch your fingers when pulling or pushing on the slide
module or opening and closing the LCD, etc.
Do not apply any significant force while the Console Drawer is pulled
out, or while the Console Drawer is used, as there is a risk that the
Console Drawer may be forced from the guide rails, damage the
guide rails, or the rack may topple over, and cause personal in
dama ge to the systems.
Do not apply force to the monitor screen, and not scratch it with
objects, or not bring magnetic objects near the Console Drawer.
They can cause failure or damage to these
Note that the corners of the open Console Drawer can be dangerou
if bumped into. Always Be careful of whatever operations are done
close to the Console Drawer, while the Console Drawer is pulled out,
because it is easy to be injured by hitting the Console Dra
accidentally.
It is recommended that the Console Drawer be stowed away
rack when it is not in use
equipments are being used.
Before pulling it out, make sure that the t
Console Drawer are tightly fixed to the rack.
, or when other nearby servers or peripheral
wo screws on the front of the
products.
wer
in the
er, and pull out the
jury or
any
s
13