Introduction; Purpose Of The Manual; Additional Resources - Danfoss Vacon OPTEA Operating Manual

VACON® NXP Advanced Safety Options
Operating Guide

1 Introduction

1.1 Purpose of the Manual

This manual describes the VACON
be used with the VACON NXP AC drive.
®
The operating guide is intended for use by qualified personnel, who are familiar with the VACON
To use the product safely, read and follow the operating instructions.

1.2 Additional Resources

Resources Available for the Drive and Optional Equipment
• VACON NX OPTAF STO Board Manual
®
• VACON NX All in One Application Guide - information on working with parameters and many application examples
®
• VACON OPTE3/E5 PROFIBUS DP User Guide
®
• VACON NX I/O Boards User Manual
®
• VACON OPTEA/OPTE9 Ethernet Board User Guide
®
• VACON Ethernet Option Boards Installation Guide
®
• VACON RS485 and CAN Bus Option Boards Installation Guide
®
• VACON NXP Advanced Safety Options Quick Guide
®
• The Operating Guide of the AC drive provides the necessary information to get the drive up and running.
Supplementary publications and manuals are available from drives.danfoss.com/knowledge-center/technical-documentation/.
Standards, specifications, and official recommendations
• EN IEC-62061 – Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic con-
trol systems, 2005
• IEC 61784-3 – Industrial communication networks – Profiles – Part 3: Functional safety fieldbuses - General rules and profile defi-
nitions, 2010
• EN ISO 13849-1 – Safety of machinery – Safety-related parts of control systems – Part 1: General principles for design, 2015
• EN IEC 60204-1 – Safety of machinery – Electrical equipment of machines – Part 1: General requirements, 2006
• EN IEC 61800-5-2 – Adjustable speed electrical power drive systems – Part 5-2: Safety requirements – Functional, 2007
• IEC 61508 – Functional safety of electrical/electronic/programmable electronic safety related systems, 2010
• EN ISO 12100 – Safety of machinery -- General principles for design -- Risk assessment and risk reduction, 2010
• ISO 14121-1 – Safety of machinery -- Risk assessment -- Part 1: Principles, 2007
• Amendment – PROFIdrive on PROFIsafe Interface for functional safety; Technical Specification for PROFIBUS and PROFINET rela-
ted to PROFIdrive – Profile Drive Technology V4.1, Version 3.00.4, April 2011, Order No.: 3.272
• PROFIsafe – Profile for Safety Technology on PROFIBUS DP and PROFINET IO, Version 2.4, March 2007, Order No: 3.192b
• Recommendation of Use CNB/M/11.050, rev 05; European co-ordination of Notified Bodies for Machinery, 2013
• BGIA Report 2/2008e Functional safety of machine controls – Application of EN ISO 13849 –, 2009
Software and Configurations Files
• The firmware for the Advanced Safety Option,
ware/.
• VACON Safe, https://www.danfoss.com/en/service-and-support/downloads/dds/vacon-safe/.
®
• The GSD/GSDML file, https://www.danfoss.com/en/service-and-support/downloads/dds/fieldbus-configuration-files/.
For US and Canadian markets:
NOTE! Download the English and French product guides with applicable safety, warning and caution information from
www.danfoss.com/en/service-and-support/.
REMARQUE Vous pouvez télécharger les versions anglaise et française des guides produit contenant l'ensemble des informations
de sécurité, avertissements et mises en garde applicables sur le site https://www.danfoss.com/en/service-and-support/.
Danfoss A/S © 2021.06
Advanced Safety Options (OPTBL, OPTBM, or OPTBN). The VACON
®
https://www.danfoss.com/en/service-and-support/downloads/dds/fieldbus-firm-
Introduction
Advanced Safety Options can
®
drives and functional safety.
®
https://
AQ319736045637en-000101 / DPD01798 | 9