Danfoss Vacon OPTEA Operating Manual page 184

VACON® NXP Advanced Safety Options
Operating Guide
Speed measurement configuration
Encoder number of pulses
Proximity sensor number of pulses
Proximity sensor duty cycle
Control switch
Door lock
control
Door lock control 1
Door lock control 2
/PLC
controlling the
locks
Illustration 82: An Output with SLS Reached used for Door Control
This example does not consider the source of the SLS request. Additional devices and connections may be required.
There should be an access behind the door when there is a power loss or a fault in the option board. Prevent the possibility of
being trapped.
In this configuration, the door will be locked again if SLS monitoring is violated. Prevent the possibility of being trapped.
184 | Danfoss A/S © 2021.06
X4-13 (DIN2A)
SLS 1
X4-14 (DIN2B)
X3-9 (+24V)
X3-5 (OUT1A)
X3-6 (OUT1B)
X3-10 (GND)
Common ground
X3-3 (GND)
X3-4 (GND)
X3-1 (STO 1)
X3-2 (STO 2)
STO
SD2+
SD1+
SD2-
SD1-
N O T I C E
N O T I C E
N O T I C E
Advanced safety
option board
X7-1
X7-8
STO
option board
OPTAF
Configuration Examples
Value
1024
–
–
Encoder input
connections
AQ319736045637en-000101 / DPD01798