Danfoss Vacon OPTEA Operating Manual page 46

VACON® NXP Advanced Safety Options
Operating Guide
Illustration 19: The Menu Structure of the Menus Related to the Advanced Safety Option Board
Table 18: Config Settings Group (G7.4.1.1)
Index Parameter
P7.4.1.1.1 Password Reset
P7.4.1.1.2 Factory Reset
P7.4.1.1.3 Save Backup To
P7.4.1.1.4 Load Backup From
Back-up to keypad requires a newer keypad unit with extended storage capability.
1
Table 19: Fault Settings (G7.4.1.2)
Index Parame- Min
ter
P7.4.1.2.1 SafetySys- 0
tem flt
46 | Danfoss A/S © 2021.06
M7 Expander boards
G7.4 OPTBL/OPTBM/OPTBN
G7.4.1 Parameters
G7.4.1.1 Config Settings
G7.4.1.2 Fault Settings
G7.4.1.3 Encoder
G7.4.2 Monitor
G7.4.2.1 Safety Functions
G7.4.2.2 Digital I/O
G7.4.2.3 Encoder
G7.4.2.4 PROFIsafe
G7.4.2.5 File Info
G7.4.2.6 Diagnostics
Min
0
0
0
0
Max Unit De- ID
fault
2 – 0 –
Max Unit Default
1 – 0
1 – 0
1 – 0
1 – 0
Description
Selects the control board firmware response for fault code 20.
0 = "Default", F20 activated as fault or warning depending on the
case (application may decrease the reporting level, e.g. fault -> warn-
ing)
1 = "Warning", F20 activated as alarm
Overview of the System
ID Description
–
0 = No action
1 = Reset
–
0 = No action
1 = Reset
–
0 = No action
1 = Control unit
2 = Keypad
(1)
–
0 = No action
1 = Control unit
2 = Keypad
(1)
AQ319736045637en-000101 / DPD01798