Danfoss Vacon OPTEA Operating Manual page 128

VACON® NXP Advanced Safety Options
Operating Guide
Parameter
Digital Output 2
Operation for Output 1
Operation for Output 2
Group 1 for safe digital output 1
Group 2 for safe digital output 1
Group 3 for safe digital output 1
Group 4 for safe digital output 1
Group 5 for safe digital output 2
Group 6 for safe digital output 2
Group 7 for safe digital output 2
Group 8 for safe digital output 2
Group 1 for safe digital output 1
Group 2 for safe digital output 1
Group 3 for safe digital output 1
Group 4 for safe digital output 1
Group 5 for safe digital output 2
Group 6 for safe digital output 2
Group 7 for safe digital output 2
Group 8 for safe digital output 2
128 | Danfoss A/S © 2021.06
Selection
Group 4
SSM
SBC
Group 5
Group 6
Group 7
Group 8
AND
OR
NAND
NOR
Group 1 and Group 5
• STO Reached
• SS1 Reached
• SS2 Reached
• SQS Reached
• SOS Reached
• SBC Reached
• STO and SBC Reached
Group 2 and Group 6
• SLS 1 Reached
• SLS 2 Reached
• SLS 3 Reached
• SSR Reached
• SMS Reached
• SSM Reached
• SSM Above Max Limit
• SSM Below Min Limit
Group 3 and Group 7
• STO Active
• SS1 Active
• SS2 Active
• SQS Active
• SLS 1 Active
• SLS 2 Active
• SLS 3 Active
• SSR Active
• SMS Active
• SSM Active
Group 4 and Group 8
Unit Description
– Use this parameter to select the func-
tion for the digital output.
– Use this parameter to select the logical
function used to determine the output
value from the selected signals. It is
used when a group is selected for the
output.
– Use this parameter to select which sig-
nals are used to generate the output
value. A checkbox selection.
– – Use this parameter to select which sig- Use this parameter to select which sig-
nals are used to generate the output nals are used to generate the output
value. A checkbox selection. value. A checkbox selection.
AQ319736045637en-000101 / DPD01798
Parameter List