Event Logbook" Submenu - Endress+Hauser Levelflex FMP55 Operating Instructions Manual

Operating menu
Filter options
Navigation
Selection
Additional information
162
16.4.2

"Event logbook" submenu

The Event logbook submenu is only available when operating via the local display.
When operating via FieldCare, the event list can be displayed in the FieldCare
function "Event List / HistoROM".
Navigation 
 Diagnostics → Event logbook → Filter options
• All
• Failure (F)
• Function check (C)
• Out of specification (S)
• Maintenance required (M)
• Information (I)
• This parameter is only used for operation via the local display.
• The status signals are categorized according to NAMUR NE 107.
"Event list" submenu
The Event list submenu displays the history of past events of the category selected in the
Filter options parameter (→  162). A maximum of 100 events are displayed in
chronological order.
The following symbols indicate whether an event has occurred or has ended:
• : Event has occurred
• : Event has ended
Information on what is causing the message, and remedy instructions, can be viewed
via the -button.
Display format
• For event messages in category I: information event, event text, "recording event" symbol
and time the event occurred
• For event messages in category F, M, C, S (status signal): diagnostics event, event text,
"recording event" symbol and time the event occurred
Navigation 
Diagnostics → Event logbook
Diagnostics → Event logbook → Event list
Levelflex FMP55 PROFIBUS PA
Endress+Hauser
