Gasoline, Oils And Lubricant Specifications; Engine Oil; Traction/Reel Drive Chain Case Oil; Grease - Textron Jacobsen InCommand PGM 22 Technical/Repair Manual

Gasoline, Oils and Lubricant
Specifications

Engine Oil

Use only SAE 10W-30 engine oils with API classification
SF or SG.
Refer to the engine manufacturer's manual for additional
information.

Traction/Reel Drive Chain Case Oil

The traction/reel drive chain case requires SAE EP-140
oil to lubricate the drive chains and related components.

Grease

Lubricate fittings with grease that meets or exceeds NLGI
Grade 2 LB specifications. Apply grease with a manual
grease gun; fill slowly until grease begins to seep out. Do
not use a compressed air grease gun.

Synthetic Lubricants

Synthetic grease is a suitable alternative lubricant,
provided it meets or exceeds NLGI Grade 2 LB
specifications. Apply synthetic grease with a manual
grease gun; fill slowly until grease begins to seep out. Do
not use a compressed air grease gun.

Lubricant Storage

Use of clean lubricants is essential to efficient operation
of equipment.
• Always store lubricants in approved, clean
containers.
• Store containers in an area free from dirt, filings,
moisture, and other contaminates.
• Clearly mark containers for easy identification of
contents.
• Always dispose of used containers properly.

Avoid Mixing of Lubricants

Avoid mixing different brands or types of oil. Oils are
specifically manufactured to meet certain specifications
and performance standards.
Mixing different brands or types of oil can reduce the
functionality of the lubricant and result in possible
equipment damage.

Gasoline

Use clean, fresh, regular grade, unleaded gasoline with a
minimum octane rating of 86.
4157082 First Edition
SPECIFICATIONS AND GENERAL INFORMATION
Refer to the engine manufacturer's manual before using
oxygenated (blended) fuel.

Operational Checks

Never attempt to operate the machine unless you
have read the Operator's Manual and engine
manual, and know how to operate all controls
correctly.
The operational check procedures are meant to verify the
correct operation of the control systems. Before placing
the mower back into service, all checks should be
performed to ensure that each system is working
properly.
!
WARNING
2
2-7