Code - NEC Aspila Topaz Programming Manual

Program 11: System Numbering
11-09: Trunk Access Code
Description
Use Program 11-09 : Trunk Access Code to assign the trunk access code (normally 9). The trunk access code can
be set from 1 to 4 digits which is defined to type 3 and 4 in Program 11-01. This is the code extension users dial to
access Automatic Route Selection. The Individual Trunk Access Code is used when Trunk Group Routing is desired
for an outgoing line.
Caution
The digit 9 is defined in Program 11-01 as Dial Type 3 with the Number of Digits Required set to 1. If you change
the trunk access code in Program 11-09, you must make the corresponding changes in Program 11-01.
Input Data
Prog. No. Item
11-09-01
Trunk Dial
Access (Up to 4

Code

(for
Type3)
11-09-02 Alternate Dial (Up
Trunk to 4 digits)
Route
Access
Code
(for
Type4)
Conditions
None
Feature Cross Reference
Automatic Route Selection
Central Office Calls, Placing
Trunk Group Routing
Programming Manual
Input data Default
9
Use this program to assign the
trunk access code (normally
digits) 9). This is the code extension
Users dial to access
Automatic
Route Selection.
No Use this program to define
Setting additional trunk access codes.
When a user dials the
Alternate Trunk Route
Access Code, the system
routes their call to the
Alternate Trunk Route.
Description
52
IN
SA
SB
Related Program
• 11-01 : System
Numbering
• 14-01-07 : Trunk Basic
Data Setup
• 14-05 : Trunk Group
• 14-06 : Trunk Group
Routing
• 11-01 : System
Numbering
• 14-01-07 : Trunk Basic
Data Setup
• 14-05 : Trunk Group
• 14-06 : Trunk Group
Routing
• 21-02 : Trunk Group
Routing for
Extensions
• 21-15: Alternate Trunk
Group Routing
for Extensions