NEC Aspila Topaz Programming Manual page 239

IN
SA
SB
Description
Use Program 25-05 : DID/DISA Error Message Assignment to assign the VRS message number to be used as the
Automated Attendant error message. For each DID/DISA trunk that the VRS will answer, enter the VRS message
(1-48) the outside caller hears if they dial incorrectly. If you enter 0 (i.e., no error message), the call reroutes
according to Program 25-03 and 25-04.
For each trunk, you make a separate entry for each Night Service mode.
Input Data
Trunk Port Number
Day/Night Mode
1-8 0-48 (0 : No setting)
Conditions
None
Feature Cross Reference
Direct Inward System Access (DISA)
Telephone Programming Instructions
To enter data for Program 25-05(DID/DISA Error Message Assignment):
1. Enter the programming mode.
2. Enter 25 05
25-05-01TrkPrt1
Mode1 MSG No=0
3. Enter the number of the item you want to program.
25-05-xxTrkPrtxx
xxxxx
4. Select the Trunk port number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 25: DID/DISA Setup
25-05: DID/DISA Error Message Assignment
VRS Message Number
231
1-51
Default Related Program
0
Programming Manual