NEC Aspila Topaz Programming Manual page 355

IN
Program 82:
SA
82-07:
SB
Description
Use Program 82-07 : CODEC Filter Setup for Analogue Station Ports to define the CODEC (QSLAC) Filter for
each analogue extension port.
The CODEC filter operates according to a set value of PRG82-09 when CODEC filter type 4(Specified Data) is set
in this setting.
Input Data
Extension Port Number
CODEC Filter Type
0 : No filter
1 : 0 dB Loss
2 : 4 dB Loss
3 : 8 dB Loss
4 : Specified Data
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 82-07 (CODEC Filter Setup for Analogue Station Ports):
1. Enter the programming mode.
2. Enter 82 07
82-07-01Ex Prt1
CODEC Filter 1
3. Enter the number of the item you want to program.
82-07-xx Ex Prtxx
xxxxx
4. Select the Extension port number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Basic Hardware Setup for Extension
CODEC Filter Setup for Analogue Station Ports
347
01-72
Default
1
Programming Manual
Related
Program
82-09