NEC Aspila Topaz Programming Manual page 249

IN
SA
SB
Description
Use Program 25-13 : System Option for DISA to enter the password DISA callers must dial before the system will
allow them to record, listen to and or erase the VRS messages. This program also is used to define additional DISA
call options.
Input Data
Prog. No.
25-13-01
VRS Password
Enter the password DISA callers must dial before the
system will allow them to record, listen to and or
erase the VAU messages.
25-13-02 Continue Code for DISA Trunk to Trunk
Program the Continue code. This code is used with
the Warning Tone for Long Conversation for DISA
callers. This allows the user to press the programmed
code to continue the conversation the call. If the
Continue code is entered, this resets the timer in
Program 25-07-07.
25-13-03 Disconnect Code for DISA Trunk to Trunk
Program the Disconnect code. This code is used with
the Warning Tone for Long Conversation for DISA
callers. This allows the user to press the programmed
code to disconnect the call. If the Disconnect code is
entered, the call is disconnected immediately.
Conditions
None
Feature Cross Reference
Direct Inward System Access (DISA)
Voice Response System (VRS)
Program 25: DID/DISA Setup
25-13: System Option for DISA
Item
241
Input Data Default
0-9,*,#
000000
(Fixed 6 digits)
0-9,*,#
No setting
(1 digits)
0-9,*,#
No setting
(1 digits)
Programming Manual
Related
Program