NEC Aspila Topaz Programming Manual page 107

IN
SA
SB
COPY
Description
Use Program 15-02 : Multi-Line Telephone Basic Data Setup to set up various keyset options.
Input Data
Extension Number
Prog. No.
15-02-01 Display Language Selection
15-02-02 -Not Used-
15-02-03
-Not Used-
15-02-04 Abbreviated Dialing DIAL Key Control
Use this option to control the function of the
extension's DIAL key when used with
Abbreviated Dialing. The DIAL key can
access either the Common or Group
Abbreviated Dialing numbers.
15-02-05 Transfer Key Operation Mode
Use this option to set the operation mode of
the extension's CONF (TRF) key. The keys
can be for Call Transfer, Serial Calling or
Flash. When selecting the
Flash option (selection 2), refer also to
Program 81-01-14.
15-02-06
Hold Key Operation Mode
Use this option to set the function of the
keyset Hold key.The Hold key can activate
normal Hold, Exclusive Hold or Park.
15-02-07 Automatic Hold for Trunk Key
During Trunk Call, press other Trunk key to
make a hold or disconnect.
15-02-08 Pre-select/One-touch Key
Use this option to answer the Incoming
Trunk call or hold line by pressing Trunk
key.
15-02-09
Ringing Line Preference for Intercom
Calls
Use this option to select between Idle and
Ringing Line Preference for Intercom Call.
15-02-10 Ringing Line Preference for Trunk Calls
Use this option to select between Idle and
Ringing Line Preference for Trunk Call.
Program 15: Extension Basic Setup
15-02:
Multi-Line Telephone Basic Data Setup
Item
99
Max. 4 digits
Input data
1 : English
5 : Spanish
7 : Portuguese
-
-
0 : Common and individual
Abbreviated Dialing
1 : Group Abbreviated
Dialing
0 : Transfer
1 : Series call
2 : Flash
0 : Normal Hold
1 : Exclusive Hold
2 : Park Hold
0 : Enable (Hold)
1 : Disable (Disconnect)
0 : Pre-select
1 : One-touch
0 : Off
1 : On
0 : Off
1 : On
Programming Manual
Default
Related
Program
1
-
-
0
0
0
1
1
1
1