NEC Aspila Topaz Programming Manual page 305

IN
SA
40-07:
SB
Description
Use Program 40-07 : Voice Prompt Language Assignment for Voice Mail to specify the language to be used for
the voice mail (DSPDB).
Input Data
Prog. No.
40-07-01
Voice Prompt Language Assignment for Voice
Mail
Although the system allows this option to be
changed in programming, the language will only
change if the DSPDB has the firmware which
provides the newly selected language.
Conditions
None
Feature Cross Reference
Voice Mail (DSPDB)
Telephone Programming Instructions
To enter data for Program 40-07 (Voice Prompt Language Assignment for Voice Mail):
1. Enter the programming mode.
2. Enter 40 07
40-07-01
Sys Lang 1
3. Enter the number of the item you want to program.
40-07-xx Trunkxx
xxxxx
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 40
Voice Prompt Language Assignment for Voice Mail
Item
297
: Voice Mail Setup
Input Data Default
1 : English
Programming Manual
Related
Program
1