NEC Aspila Topaz Programming Manual page 155

IN
SA
20-13
SB
Input Data(Cont'd)
Prog. No.
20-13-31 Connected Line identification (COLP)
20-13-32
Deny Multiple Barge-In
Enable (1) or disable (0) the extension's ability to have
multiple user's Barge In to their conversation.
20-13-33
-Not Used-
20-13-34 Block Manual Off-Hook Signaling
Enable (1) or disable (0) an extension's ability to block
off-hook signals manually sent from a co-worker.
20-13-35
Block Camp-On
Enable (1) or disable (0) an extension's ability to block
callers from dialing 2 to Camp On.
20-13-36 Call Timer
In an extension's Class of Service, enable (1) or disable
(0) an extension's ability to use the Call Timer.
20-13-37
-Not used-
20-13-38
Headset Ear Piece Ringing
*All Classes are above mentioned default value.
Conditions
None
Feature Cross Reference
Class of Service
Telephone Programming Instructions
To enter data for Program 20-13(Class of Service Options (Supplementary Service)):
1. Enter the programming mode.
2. Enter 20 13
20-13-01 F-Cls1
Long Conv Alarm1
3. Enter the number of the item you want to program.
20-13-xx F-Clsxx
xxxxx
4. Select the Class of Service number to be programmed by pressing the FLASH or the VOLUME
VOLUME keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 20: System Option Setup
: Class of Service Options (Supplementary Service)
Item Input Data
0 : Off
1 : On
147
Related
Default*
Program
0
0
-
0
0
1
-
0
or
Programming Manual