NEC Aspila Topaz Programming Manual page 260

Program 26:
26-08:
LCR Manual Override Access Code Table
Description
Use Program 26-08 : LCR Manual Override Access Code Table to define the access codes that the users can dial
to select an indirect carrier i.e. bypass the automatic selection of Program 26-02.
Input Data
Manual Override Access Code Table Number
Prog. No. Description
26-08-01 Manual Override Access Code
This code is dialed by the user to
bypass the automatic selection.
26-08-02 Carrier table No.
The carrier table number of
Program 26-05.
Conditions
The override code must begin with a digit 1 or it will not be checked against this table.
There can also exemptions to this table in Program 26-09.
Feature Cross Reference
Least Cost Routing
Telephone Programming Instructions
To enter data for Program 26-08(LCR Manual Override Access Code Table):
1. Enter the programming mode.
2. Enter 26 08
26-08-01Manual 1
Dial
3. Enter the number of the item you want to program.
26-08-xx
Manualxx
4. Select the Manual Override Access Code Table number to be programmed by pressing the FLASH or the
VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Programming Manual
ARS Service & Least Cost Routing
Input Data
Max.4 digits( 0-9,*,#)
0-25
252
IN
SA
SB
1-10
Related
Default
Program
No setting 26-02
0 26-05