NEC Aspila Topaz Programming Manual page 319

IN
SA
SB
Description
Use Program 44-06 : Additional Dial Table to set the additional dial table to add prior to the dialed ARS/F-Route
number.
Input Data
Additional Dial Table Number
1-1000
Conditions
None
Feature Cross Reference
Automatic Route Selection(ARS)/F-Route
Telephone Programming Instructions
To enter data for Program 44-06(Additional Dial Table):
1. Enter the programming mode.
2. Enter 44 06
44-06-01 Add1
Dial
3. Enter the number of the item you want to program.
44-06-xx Addxxxx
xxxxx
4. Select the Additional Dial Table number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 44: ARS/F-Route Setup
44-06: Additional Dial Table
Additional Dial
Up to 36 digits(0-9,*,#,Pause)
311
Related
Default
Program
No setting
Programming Manual