NEC Aspila Topaz Programming Manual page 237

IN
SA
25-03:
SB
Description
Use Program 25-03 : DID/DISA Transfer Ring Group with Incorrect Dialing to set what happens to a call when
the DISA caller dials incorrectly or waits too long to dial. The call can either disconnect (0) or Transfer to an
alternate destination (a ring group or voice mail). When setting the DISA and DID Operating Mode, you make an
entry for each Night Service mode.
Input Data
Trunk Port Number
Day/Night Mode
0 : Disconnect
1-25 : Incoming Ring Group
1-8
101 : (DSPDB-VM)
Conditions
None
Feature Cross Reference
Direct Inward System Access (DISA)
Telephone Programming Instructions
To enter data for Program 25-03(DID/DISA Transfer ring Group with Incorrect Dialing):
1. Enter the programming mode.
2. Enter 25 03
25-03-01TrkPrt1
Mode1 IRG No=0
3. Enter the number of the item you want to program.
25-03-xxTrkPrtxx
xxxxx
4. Select the Trunk port number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 25: DID/DISA Setup
DID/DISA Transfer Ring with Incorrect Dialing
Incoming Group Number
229
1-51
Default Related Program
0 22-04
Programming Manual