NEC Aspila Topaz Programming Manual page 365

IN
SA
SB
Description
Use Program 90-06 : Trunk Control is used for the trunk maintenance. Busy Out lets you block a PCB from
placing outgoing calls. Once busied out, none of the ports on the PCB can be used for new calls. Existing calls,
however, are not torn down.
Input Data
Menu Number
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 90-06 (Trunk Control):
1. Enter the programming mode.
2. Enter 90 05
90-06-01 Trunk1
Menu
3. Enter the number of the item you want to program.
90-06-xx Trunkx
xxxxx
4. Select the Menu number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 90: Maintenance Program
Trunk Port Number
1-51
1 : Set Busy Out
2 : Reset/Release Busy Out
357
90-06: Trunk Control
Programming Manual