NEC Aspila Topaz Programming Manual page 246

Program 25: DID/DISA Setup
25-10: Trunk Group Routing for DISA
Description
Use Program 25-10 : Trunk Group Routing for DISA to assign the Trunk Group route chosen when a user places
a DISA call into the system and dials 9. Set Trunk Group Routing in Program 14-06. Enable or disable the DISA
caller's ability to dial 9 in Program 20-14-02. You assign a route to each DISA Class of Service (1-15). The system
assigns a DISA Class of Service to a call based on the password the DISA caller dials.
When programming, you make a separate entry for each Night Service Mode.
Input Data
DISA User Number
Day/Night Mode
1-8
Conditions
None
Feature Cross Reference
Direct Inward System Access (DISA)
Telephone Programming Instructions
To enter data for Program 25-10(Trunk Group Routing for DISA):
1. Enter the programming mode.
2. Enter 25 10
25-10-01DISA-U1
Mode1 RouteTbl1
3. Enter the number of the item you want to program.
25-10-xxDISA-
Uxx
4. Select the DISA User number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Programming Manual
Route Table Number
0-25 (0 : No Setting)
238
IN
SA
SB
1-15
Default
1