NEC Aspila Topaz Programming Manual page 168

Program 20: System Option Setup
20-21:
System Option for Long Conversation
Description
Use Program 20-21 : System Options for Long Conversation to define the system options for the Long
Conversation feature.
Input Data
Prog. No.
20-21-01 Long Conversation Alarm 1
The warning tone for long toll calls sounds after this
interval.
20-21-02 Long Conversation Alarm 2
After the initial long toll call warning tone, additional
warning tones sound after this interval.
20-21-03
Long Conversation Cutoff for Incoming Call
This timer determines how long the system will wait before
disconnecting an incoming call.
20-21-04 Long Conversation Cutoff for Outgoing Call
This timer determines how long the system will wait before
disconnecting an outgoing call.
Conditions
None
Feature Cross Reference
Long Conversation Cutoff
Telephone Programming Instructions
To enter data for Program 20-21(System Options for Long Conversation):
1. Enter the programming mode.
2. Enter 20 21
20-21-01
Alarm 1 170
3. Enter the number of the item you want to program.
20-21-xx
xxxxx
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Programming Manual
Item
160
Input data
0-64800(sec.)
0-64800(sec.)
0-64800(sec.)
0-64800(sec.)
IN
SA
SB
Default
170
180
0
0