NEC Aspila Topaz Programming Manual page 187

IN
SA
21-10:
SB
Description
Use Program 21-10 : Dial Block Restriction Class Per Extensions to define the Toll Restriction Class to each
extension when the extension is set for Dial Block Restriction. If this data is "0", Toll Restriction Class follows
Program 21-09-01.
Input Data
Extension Number
Toll Restriction Class
0,1-15(0 : No setting)
Conditions
None
Feature Cross Reference
Toll Restriction
Telephone Programming Instructions
To enter data for Program 21-10(Dial Block Restriction Class Per Extensions):
1. Enter the programming mode.
2. Enter 21 10
21-10-01 TEL200
T/R Class 1
3. Enter the number of the item you want to program.
21-10-xx
TELxxxx
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 21: Outgoing Call Setup
Dial Block Restriction Class Per Extensions
179
Max. 4 digits
Default
0
Programming Manual