NEC Aspila Topaz Programming Manual page 292

Program 35: SMDR and Account Code Setup
35-02: SMDR Output Options
Input Data(Cont'd)
Prog. No.
35-02-10
All Busy (ALB) Output
35-02-11
Walking
Number
35-02-12
DID Table Name Output
35-02-13
CLI Output When DID to Trunk
35-02-14
Date
Determine whether the date should be
displayed on SMDR reports. This option
must be set to "0" if the trunk name is
set to be displayed in Program 35-02-03.
35-02-15 CLI / DID Number Switching
35-02-16
Trunk Name or Received Dialed
Number
Determine how the SMDR should print
incoming calls on ANI/DNIS or DID
trunks. If set to (1), ANI/DNIS trunks can
print DNIS digits. If set to (0) trunk
names are printed instead
-SMDR Printout Format-
12345678901234567890123456789012345678901234567890123456789012345678901234567890
CLASS TIME LINE
aa bbbb cc:cc dddddddddd ee:ee:ee ffffffffff gggggggggggggggg hhhhhhh iiiiiiii
*Column 1(aa) : Call Number
Indicate the number. Up to 55 calls are printout per a page.
*Column 2(bbbb) : Class of Call
Indicate the type of call as below;
Item
AIN Incoming Call on Analogue Trunk
AOT Outgoing Call on Analogue Trunk
IIN Incoming Call on ISDN Trunk
IOT Outgoing Call on ISDN Trunk
PIN Incoming Call on Tie Line
*Column 3(cc:cc) : Time
Indicate a time(24 hours format) of incoming/outgoing/transferred call.
*Column 4(dd...) : Trunk Number/Name
Indicate a Trunk Number or Name.
*Column 5(ee:ee:ee) : Call Duration Time
Indicate a call duration time of call.
*Column 6(ff....) : Extension name
Indicate a Extension Name.
*Column 7(gg....) : Dialed data or received Caller-ID Data
Indicate the dialed data of outgoing call. And also, indicate the received Caller-ID data.
Programming Manual
Item
Toll Restriction Table
DURATION STATION
Description
Input Data
0 : Not Output
1 : Output
0 : Not Output
1 : Output
0 : Not Output
1 : Output
0 : Not Output
1 : Output
0 : Not Output
1 : Output
0 : Calling Party No.
1 : Called Party No.
0 : Trunk port Name
1 : Received Dial
Number
XX/XX/XX PAGE XXX
DIALLED No./CLI RD/COST ACCOUNT
Item
POT Outgoing Call on Tie Line
TOT Outgoing Call by Tandem trunk
ALB All Trunk Busy
BRD Barred Outgoing Call
BFL Buffer Full
284
IN
SA
SB
Related
Default
Program
0
1
0
0
0
0
0
Description