NEC Aspila Topaz Programming Manual page 248

Intelligent hybrid system
Hide thumbs Also See for Aspila Topaz:
Table of Contents

Advertisement

Program 25: DID/DISA Setup
25-12:
Alternate Trunk Group Routing for DISA
Description
Use Program 25-12 : Alternate Trunk Group Routing for DISA to define the trunk route selected when a DISA
caller dials the Alternate Trunk Access Code. The route selected is based on the DISA caller's Class of Service,
which is in turn determined by the password the caller dials. When programming, you make a separate entry for
each Night Service Mode.
Use Program 11-09-02 to set the Alternate Trunk Access Code. Use Program 14-06 to set trunk routes.
Input Data
DISA User Number
Day/Night Mode
1-8
Conditions
You cannot use Program 21-15 to assign Alternate Trunk Routing to DISA trunks.
Feature Cross Reference
Direct Inward System Access (DISA)
Trunk Group Routing
Telephone Programming Instructions
To enter data for Program 25-12(Alternate Trunk Group Routing for DISA):
1. Enter the programming mode.
2. Enter 25 12
25-12-01DISA-U1
Mode1 RouteTbl 0
3. Enter the number of the item you want to program.
25-12-xxDISA-
Uxx
4. Select the DISA User number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Programming Manual
Route Table Number
0-25 (0 : No setting)
240
IN
SA
SB
1-15
Default
0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents