NEC Aspila Topaz Programming Manual page 216

Program 22: Incoming Call Setup
22-13
DID Trunk Group to Translation Table Assignment
:
Description
Use Program 22-13 : DID Trunk Group to Translation Table Assignment to assign the DID Trunk Groups to
DID Translation Tables. DID trunks should be in their own group. If you have more than one type of DID trunk, put
each type in a separate Trunk Group. For each Trunk Group, you make a Translation Table entry for each Night
Service mode.
Input Data
Trunk Group Number
Day/Night
Mode
1-8
Conditions
None
Feature Cross Reference
Direct Inward Dialing (DID)
Telephone Programming Instructions
To enter data for Program 22-13(DID Trunk Group to Translation Table Assignment):
1. Enter the programming mode.
2. Enter 22 13
22-13-01TrkGrp1
Mode1 = 1
3. Enter the number of the item you want to program.
22-13-
xxTrkGrpxx
4. Select the Trunk Group number to be programmed by pressing the FLASH or the VOLUME
VOLUME keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Programming Manual
Conversion Table Area Number
0-20 (0 : No setting)
Default
1
208
IN
SA
SB
1-25
Related Program
or