NEC Aspila Topaz Programming Manual page 71

IN
SA
SB
Description
Use Program 11-16 : One-Digit Service Code Setup to customize the one-digit Service Codes used when a busy
or ring back signal is heard. You can customize additional Service Codes in Programs 11-10 through 11-15.
The following chart shows:
• The number of each code (01-10)
• The function of the Service Code.
• What type of telephones can use the Service Code
• The code's default entry. For example, dialing 1 (code 03) when calling an extension will switch the call from
either a voice or signal call (depending on how it's currently defined).
• Programs that may be affected by changing these codes.
Input Data
Prog. No.
11-16-01 Step Call
11-16-02 Barge-In
11-16-03 Switching of Voice/ Signal Call
11-16-04 Intercom Off Hook Signaling
11-16-05 Camp-On
11-16-06 DND/Call Forward Override
11-16-07 Message Waiting
11-16-08 -Not Used-
11-16-09 Access to Voice Mail
11-16-10 STG All Ring Mode
Conditions
None
Feature Cross Reference
• Refer to chart above.
Program 11: System Numbering
11-16: One-Digit Service Code Setup
Item
63
Terminals Default
KTS,SLT No setting
KTS,SLT No setting
KTS,SLT 1
KTS,SLT No setting
KTS,SLT No setting
KTS,SLT No setting
KTS,SLT No setting
- -
KTS,SLT No setting
KTS,SLT No setting
Programming Manual
Related
Program
16-01-05