NEC Aspila Topaz Programming Manual page 197

IN
SA
SB
Description
Use Program 22-01 : System Options for Incoming Calls to define the system options for incoming calls.
Input Data
Prog. No. Item
22-01-01
Incoming Call
Priority
22-01-02 Incoming Call
Ring No Answer
Alarm
22-01-03 Incoming Call
Ring No Answer
Tone
22-01-04
DIL No Answer
Recall Time
22-01-05 -Not used-
22-01-06
DID Ring-No-
Answer Time
22-01-07
DID Incoming
Ring Group no
answer timer
22-01-08 DID Pilot Call
No answer timer
22-01-09 DID to Trunk to
Trunk no answer
timer
Program 22: Incoming Call Setup
22-01: System Options for Incoming Calls
Input data Default
0 : Intercom Call
Priority
1 : Trunk Call
Priority
0 : Disable
1 : Enable
0-64800(sec.) 60
0-64800(sec.)
- -
0-64800(sec.) 20
0-64800(sec.) 20
0-64800(sec.) 60
0-64800(sec.) 20
189
Description
1 Use this option to determine if
Intercom calls or trunk calls have
answer priority when both are
ringing simultaneously.
0 If enabled, an incoming call that
rings longer than the Ring No
Answer Alarm interval (22-01-03),
will change to a unique ring
cadence to indicate that the call
has been ringing too long. If
disabled, this will not occur.
If a trunk rings a key telephone
longer than this interval, the
system changes the ring cadence.
This indicates to the user that the
call has been ringing too long
0 A DIL that rings its programmed
destination longer
interval diverts to the DIL No
Answer Ring Group
Program 22-08).
-
In systems with DID Ring-No-
Answer Intercept, this interval sets
the Ring-No-Answer time. This
interval is how long a DID call
rings the destination extension
before rerouting to the intercept
ring group.
Related
Program
22-01-03
22-01-04
22-01-02
than this
(set in
22-12
Programming Manual