NEC Aspila Topaz Programming Manual page 293

IN
Program
SA
SB
*Column 8(hh....) : Ring Duration or Cost
Indicate a ringing duration time at the extension for incoming call. And also, indicate the calling cost data for
outgoing call. However the calling cost data is not exactly same value as the PTT's calculation cost.
<Note>Calling cost data will be provided from Line Provider by using Metering Pulse or "Advice of Charge" of
ISDN. For these services availability, ask your country's Line Provider.
*Column 9(ii....) : Account Code or Password index No. of Walking Toll Restriction
Indicate a Account Code or Password index No. if Walking Toll Restriction is used.
-Summary Data Printout Format-
For Example) Daily Summary
OUTGOING CALL/COST SUMMARY
FOR DAY OF DD/MM/YY
TOTAL NO. OF OUTGOING PSTN CALLS:
TOTAL NO. OF OUTGOING ISDN CALLS:
NO. OF OUTGOING PSTN CALLS COSTED:XXXXX COST:XXXXXX.XX
NO. OF OUTGOING PSTN CALLS COSTED:XXXXX COST:XXXXXX.XX
Conditions
None
Feature Cross Reference
Station Message Detail Recording (SMDR)
Telephone Programming Instructions
To enter data for Program 35-02 (SMDR Output Options):
1. Enter the programming mode.
2. Enter 35 02
35-02-01 SMDR-P1
T/R Call 1
3. Enter the number of the item you want to program.
35-02-xx SMDR-Px
xxxxx
4. Select the SMDR port number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
35: SMDR and Account Code Setup
35-02: SMDR Output Options
285
Programming Manual