IN
SA
SB
Description
Use Program 12-06 : Night Mode Group Assignment for Trunks to assign a Day/Night Mode Group for each
trunk port.
Input Data
Trunk Port Number
Night Mode Service Group Number
Default
No setting
Conditions
None
Feature Cross Reference
Night Service
Telephone Programming Instructions
To enter data for Program 12-06 (Night Mode Group Assignment for Trunks):
1. Enter the programming mode.
2. Enter 12 06
12-06-01TrkPrt1
Night Mode Grp 1
3. Enter the number of the item you want to program.
12-06-xx
xxxxx
4. Select the Trunk port number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 12: Night Mode Setup
12-06
: Night Mode Group Assignment for Trunks
1-4
Default
73
1-51
1
Programming Manual