NEC Aspila Topaz Programming Manual page 214

Program 22: Incoming Call Setup
22-12: DID Intercept Ring Group
Description
For each DID Translation Table, use Program 22-12 : DID Intercept Ring Group to define the first destination
group for DID calls.
Depending on the entry in Program 22-09 and 22-11, the incoming calls will route to the first destination group by
the following;
• Vacant number intercept (vacant number means that there is no phone connected, no station card installed, or the
extension number is not defined in Program 11-02)
• Busy intercept
• Ring-no-answer intercept
If the destination is '0', the calls will be forwarded to the trunk ring group defined in Program 22-11 based on the
table assigned to the DID trunk.
Note: If Program 22-09-05 and 22-09-06 are set, the priority of transferring will be in this order:
Program 22-09-05
Input Data
Conversion Table Area Number
Day/Night
Mode
0 : No setting
1-25 : Incoming Ring Group
1-8
101 : DSPDB-VM
Conditions
None
Feature Cross Reference
Direct Inward Dialing (DID)
Programming Manual
Program 22-09-06
Incoming Group Number
206
Program 22-12
1-20
Default
0
IN
SA
SB
Related Program