NEC Aspila Topaz Programming Manual page 280

Program 31:
31-06: External Speaker Control
Description
Use Program 31-06 : External Speaker Control to define the settings for the external speaker using an amplifier.
Input Data
External
Prog. No.
Speaker No.
31-06-01
31-06-02
1-6
31-06-03
31-06-04
31-06-05
Conditions
None
Feature Cross Reference
Paging, External
Telephone Programming Instructions
To enter data for Program 31-06(External Speaker Control):
1. Enter the programming mode.
2. Enter 31 06
31-06-01 SPK 1
PG Start Tone 2
3. Enter the number of the item you want to program.
31-06-xx
xxxxx
4. Select the External Speaker number to be Programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Programming Manual
External Speaker and Internal Paging
Item
Broadcast Splash Tone Before Paging
Use this option to enabled or disable splash
tone before Paging over an external zone. If
enabled, the system broadcasts a splash tone
before the External Paging announcement.
Broadcast Splash Tone After Paging
Use this option to enabled or disable splash
tone after Paging over an external zone. If
enabled, the system broadcasts a splash tone
at the end of an External Paging
announcement.
Speech Path（2PGDU—Speaker）
CODEC Transmit Gain Setup
CODEC Receive Gain Setup
0 : No tone
1 : Splash tone
2 : Chime tone
0 : No tone
1 : Splash tone
2 : Chime tone
0 : Both way
1 : One way
1-63(-15.5.........+15.5)
1-63(-15.5.........+15.5)
272
IN
SA
SB
Default
Input Data
2
2
1
32 (0dB)
32 (0dB)