Record Circuits - NEC Aspila Topaz Programming Manual

IN
Program 10: System Configuration Setup
SA
SB
Description
Use Program 10-07 : Conversation Record Circuits to select the number of Conference circuits to be used for
Conversation Recording.
Even if this program is set to '0', the telephone conversation recording function can be used.
Note:
In this case, 16 circuits will be shared by conference recording and conversation recording. The number of the
conference circuits occupied by a conversation recording is two.
Input Data
The number of Conversation Recording
（0 : No setting, 2-32:Conference Resource）
Conditions
None
Feature Cross Reference
Conference
Telephone Programming Instructions
To enter data for Program 10-07 (Conversation Record Circuits):
1. Enter the programming mode.
2. Enter 10 07
10-07-01
No. of Record 0
3. Enter the number of the item you want to program.
10-07-xx
xxxxx
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
10-07: Conversation Record Circuits
0-16
21
Default
0
Programming Manual