NEC Aspila Topaz Programming Manual page 320

Program 44: ARS/F-Route Setup
44-07: Gain Table for F-Route Access
Description
Use Program 44-07 : Gain Table for ARS/F-Route Access to set the PAD table. If an extension dials ARS/F-
Route number;
• The Extension Dial Gain Table is activated, which is assigned in Program 44-05.
• The Extension Dial Gain Table follows "Outgoing transmit" and "Outgoing receive" settings.
If the incoming call is transferred to another line using ARS/F-Route;
• The Tandem Gain Table is activated, which is assigned in Program 44-05.
• The Tandem Gain Table follows the "Incoming transmit" and "Incoming receive" settings for incoming line, and
"Outgoing transmit" and "Outgoing receive" settings for the outgoing line.
Note: For the ARS/F-Route call (in the above case), CODEC gain in Program 14-01-02 and 14-01-03 are not
activated
Input Data
Gain Table Number
Prog. No.
44-07-01
Incoming Transmit
44-07-02 Incoming Receive
44-07-03 Outgoing Transmit
44-07-04 Outgoing Receive
Conditions
None
Feature Cross Reference
Automatic Route Selection(ARS)/F-Route
Programming Manual
Item
1-63 (-15.5.....+15.5)
1-63 (-15.5.....+15.5)
1-63 (-15.5.....+15.5)
1-63 (-15.5.....+15.5)
312
1-500
Input Data Default
32(0dB)
32(0dB)
32(0dB)
32(0dB)
IN
SA
SB
Related
Program