NEC Aspila Topaz Programming Manual page 300

Program 40: Voice Mail Setup
40-02: Mailbox Setup
Description
Use Program 40-02 : Mailbox Setup to define the mailbox of the Voice Mail (DSPDB).
There are a maximum of 300 mailboxes in the DSPDB. Use this program to set the box number and password linked
to the extension number (or pilot number) for each mailbox.
Input Data
DSPDB Message Box Number
Prog. No.
40-02-01 Mailbox Number
A mailbox number should use the same
number of an extension.
40-02-02 Mailbox Password
If not required, leave this option empty.
Conditions
None
Feature Cross Reference
Voice Mail (DSPDB)
Telephone Programming Instructions
To enter data for Program 40-02 (SMDR Output Options):
1. Enter the programming mode.
2. Enter 40 02
40-02-01MgBox1
Mail box No.
3. Enter the number of the item you want to program.
40-02-
xxMgBoxxxx
4. Select the Message Box number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Programming Manual
Item
Up to 4 digits
Dial 4 digits Fixed
292
001-300
Input Data Default
No setting
No setting
IN
SA
SB
Related
Program