NEC Aspila Topaz Programming Manual page 190

Program 21: Outgoing Call Setup
21-13:
ISDN Calling Party Number Setup for Extensions
Description
Use Program 21-13 : ISDN Calling Party Number Setup for Extensions to assign each extension a Calling Party
Number (maximum 16 digits per entry). The calling number is the subscriber number of the dial-in number. When a
call is made by an extension which does not have an Extension Calling Number assigned (Program 21-12), the
system sends the calling number for the ISDN trunk defined in Program 21-13.
If the Calling Party Number is assigned in both Programs 21-12 and 21-13, the system sends the data in
Note:
Program 21-13.
Input Data
Extension Port Number
Calling Party Number
0-9,*,# (Max. 16 digits)
Conditions
None
Feature Cross Reference
ISDN Compatibility
Telephone Programming Instructions
To enter data for Program 21-13(Calling Party Number Setup for Extensions):
1. Enter the programming mode.
2. Enter 21 13
21-13-01 TEL200
PartyNo
3. Enter the number of the item you want to program.
21-13-xx
TELxxxx
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Programming Manual
Max. 4 digits
No setting
182
IN
SA
SB
Default