NEC Aspila Topaz Programming Manual page 21

IN
Program 10: System Configuration Setup
SA
SB
Description
Use Program 10-01 : Time and Date to change the system Time and Date through system programming. Extension
users can also dial Service Code 828 to change the Time if allowed by an extension's Class of Service.
Input Data
Prog. No. Item
Year
10-01-01
10-01-02 Month
10-01-03 Day
10-01-04 Week
10-01-05 Hour
Minute
10-01-06
10-01-07 Second
Conditions
None
Feature Cross Reference
Time and Date
Telephone Programming Instructions
To enter data for Program 10-01 (Time and Date):
1. Enter the programming mode.
2. Enter 10 01
10-01-01
Year
3. Enter the number of the item you want to program.
10-01-xx
xxxxx
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Input data Default
00-99 No setting
01-12 No setting
01-31 No setting
1-7
No setting
(Sun-Sat)
00-23 No setting
00-59 No setting
00-59 No setting
13
10-01: Time and Date
Description
Enter two digits for year (00-99)
Enter two digits(01-12) for the month
Enter two digits(01-31) for the day
Enter digit for the day of the week
(1=Sunday,........,7=Saturday)
Enter two digits(00-23) for the hour
Enter two digits(00-59) for the Minute
Enter two digits(00-59) for the second
Programming Manual