NEC Aspila Topaz Programming Manual page 98

Program 14: Trunk Basic Setup
14-05: Trunk Groups
Description
Use Program 14-05 : Trunk Groups to assign trunks to Trunk Groups. You can also assign the outbound priority
for trunks within the group. When users dial up the trunk group, they seize the trunks in the order you specify in the
outbound priority entry.
Input Data
Trunk Port Number
Trunk Group Number
0-25
Default
Trunk Port
1
:
51
Conditions
None
Feature Cross Reference
Trunk Groups
Telephone Programming Instructions
To enter data for Program 14-05(Trunk Group):
1. Enter the programming mode.
2. Enter 14 05
14-05-01 Trunk1
Group No. 1
3. Enter the number of the item you want to program.
14-05-xx Trunkxx
xxxxx
4. Select the Trunk port number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section
Programming Manual
Order Number
Group
1
:
1
90
IN
SA
SB
1-51
1-51
Priority(Order)
1
:
51