NEC Aspila Topaz Programming Manual page 199

IN
SA
SB
COPY
Description
Use Program 22-02 : Incoming Call Trunk Setup to assign the incoming trunk type for each trunk. There is one
item for each Night Service Mode.
Input Data
Trunk Port Number
Day/Night
Incoming Type
Mode.
1-8
0 : Normal
1 : VRS(Second Dial Tone if no
VRS installed)
2 : DISA
3 : DID
4 : DIL
5 : Not Used
6 : Delayed DID
Conditions
None
Feature Cross Reference
Central office Calls, Answering
Telephone Programming Instructions
To enter data for Program 22-02(Incoming Call Trunk Setup):
1. Enter the programming mode.
2. Enter 22 02
22-02-01 Trunk1
Mode1 TRK
3. Enter the number of the item you want to program.
22-02-xx Trunkxx
xxxxx
4. Select the trunk number to be programmed by pressing the FLASH or the VOLUME
VOLUME keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 22: Incoming Call Setup
22-02: Incoming Call Trunk Setup
Default
0 Use this option to set the feature
type for the trunk you
programming.
191
1-51
Description
are
or
Programming Manual
Related
Program
14-04