NEC Aspila Topaz Programming Manual page 176

Program 21: Outgoing Call Setup
21-03: Trunk Group Routing for Trunks
Description
Use Program 21-03 : Trunk Group Routing for Trunks to set the Trunk Route Table for Automatic External Call
Forward. The Route Table is set in Program 14-06.
Input Data
Trunk Port Number
Day/ Night Mode
1-8
Conditions
None
Feature Cross Reference
Trunk Group Routing
Telephone Programming Instructions
To enter data for Program 21-03(Trunk Group Routing for Trunks):
1. Enter the programming mode.
2. Enter 21 03
21-03-01 Trunk1
Mode1=RouteTBL
3. Enter the number of the item you want to program.
21-03-xx Trunkxx
xxxxx
4. Select the Trunk number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Programming Manual
Route table number
0-25 ( 0 : No setting)
168
COPY
1-51
Default Related Program
14-06
0
14-01-07
IN
SA
SB