NEC Aspila Topaz Programming Manual page 151

IN
SA
20-11
SB
Input Data(Cont'd)
Prog. No.
20-11-15 VRS Personal Greeting
Enables/disables extension's ability to dial Service Code
713 to record, listen to or erase the Personal Greeting
Message.
20-11-16
Call Redirect
Enable or disable a keyset user's ability to transfer a call
to a pre-defined destination (such as an operator, voice
mail, or another extension) without answering the call.
20-11-17
Call transfer setup for each telephone group
20-11-18 No Recall
Allow (0) or prevent (1) answered Transferred calls from
recalling the originating extension.
20-11-19
Normal/Extended Park
Determine if an extension's Class of Service should allow
either a normal or extended Park.
20-11-20 Ring Inward recall disable
20-11-21 On Hook Trunk to Trunk Transfer Restriction
*All Classes are above mentioned default value.
Conditions
None
Feature Cross Reference
Class of Service
Telephone Programming Instructions
To enter data for Program 20-11(Class of Service Options(Hold/Transfer Service)):
1. Enter the programming mode.
2. Enter 20 11
20-11-01 F-Cls1
Call Forward 1
3. Enter the number of the item you want to program.
20-11-xx F-Clsxx
xxxxx
4. Select the Class of Service number to be programmed by pressing the FLASH or the VOLUME
VOLUME keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 20: System Option Setup
: Class of Service Options (Hold/Transfer Service)
Item Input Data
0 : Off
1 : On
143
Related
Default*
Program
1
0
1
0
0
0
0
or
Programming Manual