NEC Aspila Topaz Programming Manual page 120

Program 15: Extension Basic Setup
15-08:
Incoming Virtual Extension Ring Tone Setup
Description
Use Program 15-08 : Incoming Virtual Extension Ring Tone Setup to assign a ring tone range (0-4) to incoming
virtual extensions assigned to a Virtual Extension key (Program 15-07). If you enable ringing for the key in Program
15-09, the key rings with the tone you set in this program. Also see Program 22-03. The chart below shows the
available tones.
Input Data
Extension Number
Incoming Ring Pattern
0 : Tone Pattern 1
1 : Tone Pattern 2
2 : Tone Pattern 3
3 : Tone Pattern 4
4 : Incoming Extension Ring Tone
Incoming Signal Frequency Pattern
0: Tone Pattern 1
1: Tone Pattern 2
2: Tone Pattern 3
3: Tone Pattern 4
4: Internal Incoming Signal Frequency
Conditions
None
Feature Cross Reference
Multiple Directory Number/ Call Coverage
Programming Manual
Default
When an extension or a virtual extension is assigned to
the function key on the key telephone, select the ring tone
0 :
when receiving a call on that key.
Tone Pattern 1
Frequency
600/450/16Hz
450/16Hz
600/450/16Hz
112
COPY
Max. 4 digits
Description
Modulation
600Hz
IN
SA
SB
FM
AM
-
FM