NEC Aspila Topaz Programming Manual page 258

Program 26:
26-06: LCR Authorization Code Table
Description
Use Program 26-06 : LCR Authorization Code Table to define the optional Authorization code (or PIN code)
required by the Indirect Carrier. The Authorization code is inserted if set in Program 26-05-03.
Input Data
Authorization
Table Number
1-10
Conditions
The settings must comply with the requirements of the Indirect Carrier.
The Authorization Code is used by the Indirect Carrier to identify the customer for billing purposes.
Feature Cross Reference
Least Cost Routing
Telephone Programming Instructions
To enter data for Program 26-06(LCR Authorization Code Table):
1. Enter the programming mode.
2. Enter 26 06
26-06-01AthCod1
Dial
3. Enter the number of the item you want to program.
26-06-xxAthCodxx
Dialxxxxxxxxxxxx
4. Select the Authorization Table number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Programming Manual
ARS Service & Least Cost Routing
Description
Authorization Code
Input Data
Max. 10 digits（0-9,*,#）
250
IN
SA
SB
Related
Default
Program
No setting 26-05-03